Single Ply Roofing in Austin, TX

Single ply roofing is a great roofing material for when it comes time to get a roof replacement. Single ply roofing has swept the commercial roofing industry in recent years due to its long lasting results at cost effective rate. A thin roofing membranes made of of chemicals like rubber or silicone is where single ply roofing systems gets its name from. These elastic membranes are great for commercial roofs as they can stretch far distances without losing its durability. Phone the Direct Roofing Inc team at (512) 900-4655 for single ply roofing installation in Austin, TX now.

roofer seals epdm roof

Single Ply Roofing Can Be Welded or Painted on a Roof

Long Lasting: One coating of a single ply membrane lasts 20 years. While it may seem short, single ply roofing can actually be reapplied on top of each other, helping to reduce landfill waste and replacement fees.

Energy Savings: Most of the coatings of this rubber membrane are white, making it highly reflective. Sun damage is often one of the leading causes of early roof replacement for commercial roofs, as their flat surface is entirely exposed to the damaging rays. Instead of absorbing the heat like other darker-colored roofing systems like modified bitumen and built up roofing do, the white coating instead reflects it. This helps to not only cool the roof, but the entire commercial building, resulting in lower energy bills!

Affordable: Single ply roofing is extremely budget friendly. Since only one layer is required for installation, labor times are vastly reduced, also helping to lower costs.

Durable: The rubber membrane not only helps with elasticity, but with strength. When single ply roofing dries, it forms a seamless layer which is watertight and impenetrable. Chemicals, fire, hail, and animals cannot pierce through the membrane, making this roofing system very low maintenance.

TPO Roofing

What is TPO Roofing?

TPO roofing is a popular type of single ply roofing that is made of a polymer and ethylene propylene rubber base. TPO is different from other types of rubber-based roofs because of its addition of polymer, making it more sturdy and stretchy. Additives like talc, fiberglass, or carbon filler can also be included in the base to increase durability. Out of all the single ply roofing options, TPO installation is the best for energy efficiency. Its white coating is so reflective, that Energy Star has approved it as a cool roof! For TPO roofing installation in Austin, TX, call Direct Roofing Inc at (512) 900-4655.

PVC Roofing

PVC Roofing Membrane

PVC roofing goes best with commercial roofs that experience a lot of fluctuating temperatures, chemicals, or fumes. Restaurants, warehouses, and other commercial businesses that deal with oil, grease, or chemicals often have PVC roofs. This is because PVC roofing is made up of polyvinyl chloride and strengthened with stabilizers and plasticizers like polyester, glass fiber, scrim, or fleece. All these plasticizers work together to create a chemical resistant membrane that can be welded into a seamless roofing system. Call Direct Roofing Inc at (512) 900-4655 to get PVC single ply roofing installed on your Austin, TX roof today!

TPO Vs PVC Roofing

TPO and PVC are often compared because they both have similar bases. Where TPO has a polymer and ethylene propylene base, PVC has a polyvinyl chloride base. There have been countless debates over the two membranes because they are so similar in looks and results, but some key differences help distinguish the two.


rubber roofing roll and equipment

Single Ply Roofing Often Comes in Rubber Rolls That Are Melted To the Roof

  • Does not harm environment
  • Slippery when wet
  • Available in lots of colors
  • Has better puncture resistance
  • Resists fungal growth


  • Poor environmental impact
  • Resists chemicals and grease
  • Not slippery when wet
  • Usually only available in white coatings
  • Shrinks over time and requires more maintenance
  • Slightly more flexible membrane

EPDM Roofing

What Is EPDM Roofing?

As the original single ply roofing membrane, EPDM roofing has long been a favorite among roofers and commercial business owners alike. It has held onto its title of being a high quality membrane roofing even with the invention of other single ply roofs, showing just how durable it is. EPDM roofing installation can take place in many different forms. From sealing, welding, mechanically attaching, ballasting, or fully adhering, there are plenty of options to choose from. To get EPDM single ply roofing for your Austin, TX commercial building, call Direct Roofing Inc at (512) 900-4655 today.

TPO Roofing Vs EPDM

All single ply roofing membranes are very similar. They all are highly reflective, seamless, and weather-resistant. Some single ply roofs can also resist chemicals and oil, like PVC, whereas others cannot, like TPO. All membranes will be able to withstand up to 200 pounds, but some roofs can hold more. EPDM is unique in that its long rubber strips can be cut up and made into rubber shingles to be used for more aesthetic purposes. Each single ply roofing system has their own pros and cons, so it is important to research them.

Call For Rubber Roof Installation Today

roofer paints on roof coating

Single Ply Roofing Installation Is Quick Because of the One Layer Application

Lasting longer than built up roofing and modified bitumen roofing, single ply roofing is taking over the commercial roofing industry for good reason! It is affordable, recyclable, low maintenance, and durable! If you have a flat roof and are needing a worry-free roofing system, call Direct Roofing Inc at (512) 900-4655 and set up an appointment for single ply roofing installation in Austin, TX today.